432 Cubic Inch Windsor
4.060" Bore
4.170" Stroke
 
6.200" light weight steel I-beam connecting rod with custom JE pistons.
Total Seal gapless 2nd. ring with low tension oil ring.
 
Pre-assembly to check valve to piston clearence, piston to head clearence, rocker arm geometry, and push rod length.
Pictures show Edelbrock CNC Victor heads, Jessel rocker system, ARP head studs and a Billet light weight timing set.


Our goal was 600 HP.  With a little bit of tuning we might be able to achieve our goal.
Considering this engine used pump gas, and idles at 700-900