When the Log Changes box is checked, any changes to the outputs
are logged, giving their time (in E/P clocks) and new value. The
logging line looks like this:These ports have check boxes for pins programmed as inputs and display boxes for pins programmed as outputs. Outputs are not updated while simulations are running, however inputs are active when simulations are running via the "Go" or "Step Over" buttons.
When the Log Changes box is checked, any changes to the outputs
are logged, giving their time (in E/P clocks) and new value. The
logging line looks like this:
PORTH,10022,34,22
Where PORTH is the event name (Port H output changed), 10022 is the time, 34 is the value in decimal, and 22 is the value in hexadecimal.
When the key wakeup interrupt feature is used, the interrupts are edge sensitive and won't be captured until the next P-clock.